RESERVOIR FOR ADDITIVE - R.R.

Operation 1080G20 · F.A.P. EMISSION CONTROL SYSTEM

2.2 16V JTD

Removing

- Position the vehicle on the lift.

Op. 0010T16 PARTICLE FILTER ADDITIVE - CHANGE

1. Disconnect the electrical connection for the pressure pump.

2. Disconnect the additive rapid supply and return connectors to the fuel tank.

3. Release the safety valve from the fastenings.

4. Undo the retaining bolts.

5. Remove the additive reservoir (5a) complete with protective partition (5b).

Refitting

- Position the reservoir complete with protective partition.

- Tighten the retaining bolts.

- Place the safety valve in position.

- Connect the rapid connectors to the additive reservoir.

- Connect the electrical connection for the pressure pump.

Op. 0010T16 PARTICLE FILTER ADDITIVE - CHANGE

- Remove the vehicle from the lift.