Safety valve on additive reservoir - r.r.
- Make
- Fiat
- Model
- Ulysse Factory Service Manual
- Year
- 2002–2010
- Section
- Exhaust emission control system › Safety valve on additive reservoir - r.r.
‹ Prev Pressure pump with level sensor on additive reservoir - r.r.Next › Additive injector in fuel tank - r.r.
EngineSafety valve on additive reservoir - r.r.
SAFETY VALVE ON ADDITIVE RESERVOIR - R.R.
Removing
- Position the vehicle on the lift.
1. Disconnect the rapid connector.
2. Remove the safety valve.
Refitting
- Place the safety valve in position and connect the rapid connector.
- Remove the vehicle from the lift.
‹ Prev Pressure pump with level sensor on additive reservoir - r.r.Next › Additive injector in fuel tank - r.r.
Parts & tools for this job For 2002 Fiat Ulysse
- PARTEngine gasket setSearch: Fiat Ulysse 2002 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.