ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Radiator - 1.4L PTE (CVH) > < Thermostat - 1.4L PTE (CVH)

Fiesta 1996 (08.1995-02.2002)

Engine Cooling - Water Pump—1.4L PTE (CVH) Fiesta 1996 (08/1995-02/2002)
Removal and Installation

Removal

  1. Drain the cooling system.
    For additional information, refer to Cooling System Draining, Filling and Bleeding in this section.
  1. Remove the timing belt. For additional information, refer to Section  303-01A Engine / 303-01B Engine / 303-01C Engine / 303-01D Engine / 303-01E Engine.

  1. Disconnect the coolant hose from the water pump.

  1. Remove the water pump.
    • Allow the coolant to drain into a suitable container.
    • Discard the gasket.

Installation

  1. NOTE:
    NOTE:Install a new gasket.
    To install, reverse the removal procedure.

Radiator - 1.4L PTE (CVH) > < Thermostat - 1.4L PTE (CVH)