Automatic Transmission/Transaxle - Main Control Valve Body
Fiesta 1996 (08/1995-02/2002)
Disassembly and Assembly of Subassemblies
Disassembly
Valve Body - Disassemble (valve body of vehicle built 08/1999 onwards shown).
Detach the cranked lever.
Detach the lever with shaft and cam.
Pull out the retaining plates and lay them down in order.
Pull out the valves, springs and blanking sleeves and lay them down in order.
Take out the ball.
Remove the spring plugs (strong springs) and springs.
Remove the spring plugs (weak springs) and springs.
Remove the manual valve.
Assembly
Install the components in reverse order. For additional information, refer to Description and Operation in this section.
NOTE:After inserting the clutch pressure valve, test that it moves freely using a screwdriver and that it returns to the end stop (valve body) again after the spring relaxes.