CAM ANGLE SENSOR - R.R.

Operation 1060G22 · DIESEL INJECTION PRESSURE PUMP ELECTRONIC CONTROL

2.4 JTD 20V

Removing

See in Op. 1016A10 SOUND-PROOFING COVER - R.R.

- Disconnect the negative battery terminal.

1. Disconnect the electrical connection for the cam angle sensor.

2. Undo the bolts (2a) and remove the cam angle sensor (2b).

Refitting

- Fit the cam angle sensor and secure it by tightening the bolts to the specified torque.

- Connect the electrical connection for the cam angle sensor.

- Connect the negative battery terminal.

See in Op. 1016A10 SOUND-PROOFING COVER - R.R.

2.4 JTD 10V

Removing

See in Op. 1016A10

See in Op. 7055B54 PROTECTION/GUARD under engine - R.R.

See in Op. 4450B04 Right FRONT WHEEL (one) - R.R.

See in Op. 7055B42 FRONT WHEEL ARCH LINER (one), left or right - R.R.

See in Op. 7055B64 Engine compartment DUST SEAL in front wheel arch (one), left or right - R.R.

See in Op. 1092G10

See in Op. 1032D12

See in Op. 1032B10

See in Op. 1032B40

1. Undo the fixing bolts (1a) and remove the side guard (1b) for the timing belt.

2. Disconnect the electrical connection for the cam angle sensor located near the engine oil dipstick pipe.

3. Undo the bolts (3a) and remove the cam angle sensor (3b).

Refitting

- Position the sensor and tighten the fixing bolt.

- Tighten the sensor fixing bolts to torque.

- Connect the electrical connection.

- Position the timing belt side guard and tighten the fixing bolts.

See in Op. 1032B40

See in Op. 1032B10

See in Op. 1032D12

See in Op. 1092G10

See in Op. 7055B64 Engine compartment DUST SEAL in front wheel arch (one), left or right - R.R.

See in Op. 7055B42 FRONT WHEEL ARCH LINER (one), left or right - R.R.

See in Op. 4450B04 Right FRONT WHEEL (one) - R.R.

See in Op. 7055B54 PROTECTION/GUARD under engine - R.R.

See in Op. 1016A10