Engine RPM SENSOR - R.R.

Operation 1060G20 · DIESEL INJECTION PRESSURE PUMP ELECTRONIC CONTROL

2.4 JTD 20V

Removing

- Position the vehicle on a lift.

- Disconnect the negative battery terminal.

See in Op. 7055B54 PROTECTION/GUARD under engine - R.R.

1. Disconnect the electrical connection from the engine rpm sensor.

2. Undo the bolt (2a) and remove the rpm sensor (2b).

Refitting

- Fit the rpm and timing sensor and secure it using the bolt.

- Connect the electrical connection for the engine rpm sensor.

See in Op. 7055B54 PROTECTION/GUARD under engine - R.R.

- Connect the negative battery terminal.

- Remove the vehicle from the lift.

2.4 JTD 10V

Removing

- Position the vehicle on a lift.

- Disconnect the negative battery terminal.

See in Op. 7055B54 PROTECTION/GUARD under engine - R.R.

1. Disconnect the electrical connection for the rpm sensor.

2. Undo the fixing bolt (2a) and remove the rpm and timing sensor (2b).

Refitting

- Positino the rpm and timing sensor and secure it using the fixing bolt.

- Connect the electrical connection.

See in Op. 7055B54 PROTECTION/GUARD under engine - R.R.

- Connect the negative battery terminal.

- Remove the vehicle from the lift.