Workshop Manuals Factory service & repair Lancia
01 General information02 Specifications03 Manufacturing data and tolerances04 Tightening torques05 Fluids and lubricants06 Maintenance07 Diagnostic checks08 Engine09 Clutch10 Gearbox and differential11 Axles and driveshafts12 Brakes13 Steering14 Suspension and wheels15 Heating, air conditioning and auxiliary units16 Electrical equipment17 Body fittings18 Body panels and frame19 Wiring diagrams and electrical functions20 Wiring harnesses21 Connectors and pin-outs22 Fault diagnosis23 Service news bulletins24 Special tools
Lancia Thesis Factory Service Manual (2002-2009)08 · Engine
08 · Engine

Engine COOLANT TEMPERATURE SENSOR - R.R.

Make
Lancia
Model
Thesis Factory Service Manual
Year
2002–2009
Section
Diesel fuel injection system › Engine COOLANT TEMPERATURE SENSOR - R.R.
EngineEngine COOLANT TEMPERATURE SENSOR - R.R.

Engine COOLANT TEMPERATURE SENSOR - R.R.

Operation 1060G14 · DIESEL INJECTION PRESSURE PUMP ELECTRONIC CONTROL

2.4 JTD 20V

Removing

See in Op. 7040D50 ENGINE COMPARTMENT UPPER SOUND INSULATION SHIELD - R.R.

See in Op. 1016A10 SOUND-PROOFING COVER - R.R.

See in Op. 1048B44 RIGID air supply PIPE from heat exchanger to intake manifold - R.R.

- Disconnect the negative battery terminal.

1. Disconnect the electrical connection for the air temperature sensor.

DescriptionConnector
1Engine coolant temperature sensor/sender unitK036

2. Undo the engine coolant temperature sensor from the thermostat and remove it.

Engine COOLANT TEMPERATURE SENSOR - R.R.

Refitting

- Tighten the coolant temperature sensor in the threaded seat on the thermostat.

Value - daNmFasteningComponentØ
2ENGINE COOLANT TEMPERATURE SENSOR.M12X1.5

- Connect the electrical connector.

DescriptionConnector
Engine coolant temperature sensor/sender unitK036

- Connect the negative battery terminal.

See in Op. 1048B44 RIGID air supply PIPE from heat exchanger to intake manifold - R.R.

See in Op. 1016A10 SOUND-PROOFING COVER - R.R.

See in Op. 7040D50 ENGINE COMPARTMENT UPPER SOUND INSULATION SHIELD - R.R.

2.4 JTD 10V

Removing

See in Op. 1016A10

See in Op. 1048B44

- Disconnect the negative battery terminal.

1. Disconnect the electrical connection for the air temperature sensor.

DescriptionConnector
1I.E. engine temperature sensorK045

2. Undo the engine coolant temperature sensor from the thermostat and remove it.

Engine COOLANT TEMPERATURE SENSOR - R.R.

Refitting

- Tighten the coolant temperature sensor in the threaded seat on the thermostat.

Value - daNmFasteningComponentØ
2ENGINE COOLANT TEMPERATURE SENSOR.M12X1.5

- Connect the electrical connector.

DescriptionConnector
I.E. engine temperature sensorK045

- Connect the negative battery terminal.

See in Op. 1048B44

See in Op. 1016A10

Parts & tools for this job For 2002 Lancia Thesis

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.