Engine oil radiator cooling FAN - R.R.

Operation 1084C32 · ENGINE OIL COOLING CIRCUIT

2.4 JTD 20V

Removing

- Position the vehicle on a lift.

- Open the boot and disconnect the negative battery terminal.

See in Op. 4450B02 Left FRONT WHEEL (one) - R.R.

See in Op. 7055B64 Engine compartment DUST SEAL in front wheel arch (one), left or right - R.R.

1. Disconnect the engine oil radiator cooling fan electrical supply connection.

2. Unscrew the bolts securing the fan to the engine oil cooling radiator.

3. Remove the engine oil cooling radiator fan.

Refitting

- Fit the engine oil cooling radiator fan.

- Tighten the bolts securing the fan to the engine oil cooling radiator.

- Connect the engine oil radiator cooling fan electrical supply connection.

See in Op. 7055B64 Engine compartment DUST SEAL in front wheel arch (one), left or right - R.R.

See in Op. 4450B02 Left FRONT WHEEL (one) - R.R.

- Connect the negative battery terminal.

- Remove the vehicle from the lift.