08 · Engine

Engine oil pump - r.r.

Make: Lancia
Model: Thesis Factory Service Manual
Year: 2002–2009
Section: Engine lubrication › Engine oil pump - r.r.

‹ Prev Engine oil cooling radiator air duct - R.R.Next › Engine oil pump - r.r. for vehicles with air conditioning

EngineEngine oil pump - r.r.

ENGINE OIL PUMP - R.R.

Operation 1084B12 · ENGINE OIL LUBRICATION CIRCUIT

3.0 V6, 3.2 V6

Removing

- Position the vehicle on the lift.

- [7040D12]

See in Op. 7040D30 Engine compartment FRONT CROSSMEMBER COVER - R.R.

- [7040D14]

- [7055B39]

- [7055A43]

- [7055A41]

- [7055B10]

- [4050B10]

See in Op. 7055B42 FRONT WHEEL ARCH LINER (one), left or right - R.R.

See in Op. 7055B54 PROTECTION/GUARD under engine - R.R.

- [1076B52]

See in Op. 2710A31 INTERMEDIATE DRIVE SHAFT - R.R.

See in Op. 1092G10 Engine components single drive BELT - R.R.

See in Op. 1092G20 Engine components single belt FIXED TENSIONER - R.R.

See in Op. 1008C10 Power unit REACTION ROD - Replace

See in Op. 1008C16 BRACKET on BODY for reaction link - R.R.

See in Op. 1008A44 RIGID REAR power unit MOUNTING - R.R.

See in Op. 1020A20 CRANKCASE SUMP - R.R. clean contact surfaces and apply sealant

1. Fit the crankshaft lock.

	Description	Code	Function
1	Counter-torque for crankshaft	1.870.646.000	Lock the rotation of the crankshaft

2. Undo the bolt fixing the drive chain to the engine oil pump.

1. Release the drive chain (1a) from the engine oil pump using the tool (1b).

	Description	Code	Function
1	Extractor	1.860.954.001	Tool for extracting chain from engine oil pump

Refitting

	Value - daNm	Fastening	Component	Ø
	(Main bearing caps side) 5	Bolt	ENGINE OIL PUMP	M10x1.25

	Value - daNm	Fastening	Component	Ø
	(Engine oil pump side) 4.3 - 5.3	Bolt	ENGINE OIL PUMP DRIVE CHAIN	M10

	Description	Code	Function
	Counter-torque for crankshaft	1.870.646.000	Lock the rotation of the crankshaft