Workshop Manuals Factory service & repair Lancia
01 General information02 Specifications03 Manufacturing data and tolerances04 Tightening torques05 Fluids and lubricants06 Maintenance07 Diagnostic checks08 Engine09 Clutch10 Gearbox and differential11 Axles and driveshafts12 Brakes13 Steering14 Suspension and wheels15 Heating, air conditioning and auxiliary units16 Electrical equipment17 Body fittings18 Body panels and frame19 Wiring diagrams and electrical functions20 Wiring harnesses21 Connectors and pin-outs22 Fault diagnosis23 Service news bulletins24 Special tools
Lancia Thesis Factory Service Manual (2002-2009)23 · Service news bulletins
23 · General

INJECTION CONTROL UNIT – Irregular engine operation (fluctuations between 1500 and 2000 rpm) and/or climate control syst

Make
Lancia
Model
Thesis Factory Service Manual
Year
2002–2009
Section
Engine › INJECTION CONTROL UNIT – Irregular engine operation (fluctuations between 1500 and 2000 rpm) and/or climate control syst
Service news bulletinsINJECTION CONTROL UNIT – Irregular engine operation (fluctuations between 1500 and 2000 rpm) and/or climate control syst

INJECTION CONTROL UNIT – Irregular engine operation (fluctuations between 1500 and 2000 rpm) and/or climate control system not working efficiently - Service Solution

Service news 10.07.04

INJECTION CONTROL UNIT

Irregular engine operation (fluctuations between 1500 and 2000 rpm) and/or climate control system not working efficiently - Service Solution

FAULT COMPLAINED OF

Irregular engine operation (fluctuations) during slight acceleration noticeable between 1500 and 2000 rpm and/or climate control system not working efficiently.

TECHNICAL CAUSE

Certain software functions cause the irregular operation of the injection control unit.

OPERATIONS IN PRODUCTION

Injection control unit software updated with new settings.

IMPLEMENTATION OF MODIFICATION

VersionFactoryLineChassis n.Organization n.
all versions with Manual GearboxMirafiori-1289911174
all versions with Automatic TransmissionMirafiori-1291411178

OPERATIONS IN NETWORK

Network behaviour standards towards the Customer

  • If this problem is reported and confirmed, reassure the Customer that the irregular engine operation can be solved by reprogramming the injection control unit.
  • After the operation, show the Customer the work that has been done and test the vehicle, making sure that they are satisfied.

Service Solution:if this problem is reported and confirmed, reprogramme the injection control unit using the the special Flash 3.30 CD.

OPERATING CYCLE

Using the Examiner with release 5.60.2 or higher, reprogramme the injection control unit with the new software on the Flash 3.30 CD no. 1806489000

Before beginning the reprogramming procedure, the battery must be connected to a battery charger because the radiator fan will come on and remain on during the procedure.

AVAILABILITY OF PARTS

VersionDescriptionOrder n.Qty.
all versions in questionFlash 3.30 CD18064890001

CLAIM REPORT DATA

VersionOperationPieceFaultPositionTime allowance
all versions in question10601241RA-.20

Parts & tools for this job For 2002 Lancia Thesis

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.