300Tdi Defender
37
MANUAL GEARBOX
2
ADJUSTMENT
FIFTH GEAR STOP SCREW - ADJUST
Service repair no - 37.16.67
1. Remove gear lever and transfer box lever knobs.
2. Remove gear lever cover.
3. Remove nut and washer securing gear lever.
4. Mark gear lever spline setting, remove lever and
gaiter from lower lever.
5. Remove insulation pad from tunnel aperture.
6. Remove tunnel carpet.
7. Remove retaining screws and release fuse box
cover.
8. Remove 2 screws and release fuse box from
bulkhead to assist next operation.
9. Remove 16 screws securing tunnel cover to
vehicle body.
10. Manouvre tunnel cover to clear handbrake lever
and remove from vehicle.
11. Fit gear lever and knob and select reverse gear.