WIPER MOTOR AND DRIVE RACK (page 2 of 4)
- Make
- Land Rover
- Model
- Defender 300Tdi Defender
WIPERS AND WASHERSWIPER MOTOR AND DRIVE RACK · page 2 of 4
84
WIPERS AND WASHERS
2
REPAIR
16. Fully tighten tube nut and fit rubber sleeve.
17. Reconnect earth lead and multi-plug.
18. Before fitting cover and grab handle, fit wiper
blades. Reconnect battery and test operation of
wiper motor and drive assembly. If necessary,
adjust position of wiper blades.
19. Fit wiper motor cover and door check strap
cover.
20. On RH drive vehicles, fit finisher and grab
handle.
Parts & tools for this job For Land Rover Defender
- TOOLTie rod end toolSearch: tie rod end puller
- TOOLBall joint separatorSearch: ball joint separator
- FLUIDPower steering fluidSearch: Land Rover power steering fluid
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.