Special service tools

SPECIFICATION Special tools bulletins will be issued periodically giving details of new tools as they are introduced. The specification details and instructions set out in this Manual apply only to a range of vehicles and not All orders and enquiries from the United Kingdom to any one. For the specification of a particular vehicle should be sent direct to V. L. Churchill. Overseas purchasers should consult their Dealer orders should be placed with the local V. L. Churchill The Manufacturer reserve the right to vary their distributor, where one exists. Countries where there is specifications with or without notice, and at such times no distributor may order direct from: and in such manner as they think fit. Major as well as V. L. Churchill Limited, minor changes may be involved in accordance with PO Box 3, the Manufacturer’s policy of constant product Daventry, Northants, improvement. England, NN11 4NF.

Whilst every effort is made to ensure the accuracy of The tools recommended in this Workshop Manual are the particulars contained in this Manual, neither the listed in a multi-language illustrated catalogue, Manufacturer or Dealer, by whom this Manual is obtainable from: supplied, shall in any circumstances be held liable for Messers. V. L. Churchill at the above address, any inaccuracy or the consequences thereof. or from: Land Rover Merchandising Service, PO Box 534, Erdington, Birmingham, B24 0Q5,

SPECIAL SERVICE TOOLS

The use of approved special service tools is important. They are essential if service operations are to be carried out efficiently, and safely. Where special COPYRIGHT tools are specified, only these tools should be used to avoid the possibility of personal injury or  1996 Rover Group Limited damage to the components. Also the amount of time which they save can be considerable. All rights reserved. No part of this publication may be produced, stored in a retrieval system or transmitted Every special tool is designed with the close in any form, electronic, mechanical, recording or other co-operation of Land Rover, and no tool is put into means without prior written permission of Rover production which has not been tested and approved Group. by us. New tools are only introduced where an operation cannot be satisfactorily carried out using existing tools or standard equipment. The user is therefore assured that the tool is necessary and that it will perform accurately, efficiently and safely.