Workshop Manuals Factory service & repair Land Rover
Land Rover Freelander Workshop Manual (1998-2000)17 · Drive shafts
17 · Transmission

Gaiter - inner - front

Make
Land Rover
Model
Freelander Workshop Manual
Year
1998–2000
Section
Repairs › Gaiter - inner - front
Drive shaftsGaiter - inner - front

GAITER - INNER - FRONT

Service repair no - 47.10.16

Remove

  1. Remove drive shaft. See this section.
  2. Remove outer drive shaft joint. See this section. Remove dynamic damper if fitted. See this section.
Gaiter - inner - front – Remove outer drive shaft joint. See this section. Remove dynamic damper if fitted. See thi
  1. Release both inner gaiter clips and discard. Remove gaiter from drive shaft.
  2. Inspect drive shaft gaiters and dynamic damper for damage and renew if necessary.

Refit

  1. Clean drive shaft and joint.
  2. Apply grease to joint.
  3. Position NEW gaiter to drive shaft and use a Band-it thriftool to secure the new clips.
  4. Fit dynamic damper if necessary. See this section. Fit outer drive shaft joint. See this section.
  5. Fit drive shaft. See this section.

Parts & tools for this job For 1998 Land Rover Freelander

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.