LR3/Disco 3
Radiator (26.40.01)
Removal
Published : May 7, 2004
1 .
Raise and support the vehicle.
2 .
Disconnect the battery ground cable. For additional information, refer to
Specifications
(Section 414-
00)
3 .
WARNING: Since injury such as scalding could be caused by escaping steam or coolant, do
not remove the filler cap from the coolant expansion tank while the system is hot.
Drain the cooling system. For additional information, refer to
Cooling System Draining, Filling and
Bleeding (26.10.01)
(Section 303-03)
4 .
Remove the viscous fan assembly. For additional information, refer to
Cooling Fan (26.25.19)
(Section 303-03)
5 .
Remove the radiator grille. For additional information, refer to
Radiator Grille (76.55.03)
(Section
501-08)
6 .
Remove the lower fan shroud.
Release 2 clips from the cooling fan lower shroud.
Release and remove the cooling fan lower shroud from the cooling pack.
7 .
Disconnect the coolant expansion tank hose.
Release the clip.
8 .
Disconnect the radiator upper hose.
Release the clip.
