LR3/Disco 3
9 . If no fluid loss is apparent when the filler/level plug is removed, with the engine at idle, continue to fill the transmission
until a small thread of oil runs from oil filler/level hole.
10 . Install the transmission fluid filler/level plug and tighten to 35 Nm (26 lb.ft).
11 . If installed, install the transmission heat shield.
12 . Install the transmission undershield.
13 . Disconnect T4 from the vehicle.
Install a new sealing washer.
Remove the container.
Tighten the bolts to 10 Nm (7 lb.ft).
Tighten the bolts to 10 Nm (7 lb.ft).
