LR3/Disco 3
Transmission (44.20.01)
Special Service Tools
Torque converter seal installer
308-246
Torque converter support handles
307-497 (LRT-44-010)
Removal
Published : Mar 22, 2005
1 .
WARNING: Do not work on or under a vehicle supported only by a jack. Always support the
vehicle on safety stands.
Raise and support the vehicle.
2 .
Remove the transfer case. For additional information, refer to
Transfer Case - 4.0L (41.20.25.99)
(Section 308-07B Transfer Case)
3 .
Remove the transmission heat shield.
Remove the 4 bolts.
4 .
Release the selector cable.
Using an additional wrench, restrain the clamping bush and loosen the locknut.