LR3/Disco 3
Climate Control Assembly (80.10.02)
Removal
Installation
Published : Jan 6, 2005
1 .
Remove the instrument panel console. For additional information, refer to
Instrument Panel Console
(76.25.03)
(Section 501-12)
2 .
Remove the climate control assembly.
Remove the 4 Torx screws.
Disconnect the 4 electrical connectors.
1 .
Install the climate control assembly.
Connect the electrical connectors.
Tighten the Torx screws.
2 .
Install the instrument panel console. For additional information, refer to
Instrument Panel Console
(76.25.03)
(Section 501-12)
3 .
Using T4, configure a new climate control assembly.
