LR3/Disco 3
Central Junction Box (CJB) (86.70.56)
Removal
Published : May 13, 2004
1 .
If the central junction box (CJB) is to be replaced, connect T4 to the vehicle.
2 .
Remove the glove compartment. For additional information, refer to
Glove Compartment (76.52.03)
(Section 501-12)
3 .
Remove the passenger side closing trim panel.
Release the clip.
Remove the 2 screws.
Disconnect the electrical connector.
4 .
Remove the CJB.
Remove the 2 nuts.
Disconnect the 6 electrical connectors.