LR3/Disco 3
13 .
Install the CJB. For additional information, refer to
Central Junction Box (CJB) (86.70.56)
(Section
418-00)
14 .
Connect the battery positive cable to the BJB.
Tighten the nut to 25 Nm (18 lb.ft).
15 .
Install the BJB cover.
Secure the clip.
16 .
Install the ECM.
Install the ECM top cover.
17 .
Install the ECM cover.
Tighten the Torx screws.
Connect the electrical connectors.
18 .
Install the auxiliary battery tray. For additional information, refer to
Auxiliary Battery Tray (76.10.31)
(Section 414-01)
19 .
Install the battery tray. For additional information, refer to
Battery Tray (76.10.30)
(Section 414-01)
20 .
Install the four-wheel drive control module. For additional information, refer to
Four-Wheel Drive
(4WD) Control Module (41.30.01)
(Section 308-07)
21 .
Install the air cleaner assembly. For additional information, refer to
Air Cleaner (19.10.01)
(Section
303-12)
22 .
Install the radiator grille. For additional information, refer to
Radiator Grille (76.55.03)
(Section 501-
08)
23 .
Install the engine cover. For additional information, refer to
Engine Cover - 4.4L (12.30.50)
(Section
501-05)
24 .
Connect the battery ground cable. For additional information, refer to
Specifications
(Section 414-
00)
25 .
Check the headlamp beam alignment. For additional information, refer to
Headlamp Adjustment
(86.40.17)
(Section 417-01)
