LR3/Disco 3
Installation
All vehicles
Release the grommet.
13 .
Release the hood release cable.
Release from the 3 clips.
14 .
Disconnect the front bumper wiring harness electrical connector.
15 .
With assistance, remove the BJB and wiring harness.
1 .
With assistance, install the BJB and wiring harness.
2 .
Connect the front bumper wiring harness electrical connector.
3 .
Attach the hood release cable.
Secure with the clips.
4 .
If installed, connect the pollution sensor electrical connector.
Install the grommet.
Secure the clip.
5 .
If installed, connect the speed control module electrical connector.
6 .
Connect the horn electrical connectors.