LR3/Disco 3
Liftgate Wiring Harness (86.70.84)
Removal
Published : Jul 16, 2004
1 .
Open the liftgate and tailgate.
2 .
Disconnect the battery ground cable. For additional information, refer to
Specifications
(Section 414-
00)
3 .
Remove the liftgate lower trim panel. For additional information, refer to
Liftgate Trim Panel
(76.34.11)
(Section 501-05)
4 .
Remove the liftgate upper trim panel.
Release the 4 clips.
5 .
Remove the liftgate side trim panel.
Release the 5 clips.
Repeat the above procedure for the other side.
6 .
Remove the rear headliner trim panel.
Release the 7 clips.
Disconnect the electrical connector.
