LT230Q Transfer Box
TRANSFER BOX
18
OVERHAUL
INSPECTING COMPONENTS
1. Clean all components, remove all traces of
silicone sealant using solvent and a plastic
scraper.
2. Clean all traces of Loctite and sealant from
threads of bolts and tapped holes. Ensure
holes are clean and dry.
CAUTION: Do not use a tap to clear
threads in tapped holes.
3. Check all casings and covers for cracks and
damage.
4. Replace any component found to be worn or
damaged.
Intermediate gears and shaft
1. Check gear teeth for cracks, chipping and
uneven wear.
2. Check shaft for wear and threads for damage.