Range Rover P38
57
STEERING
NEW RANGE ROVER
18
REPAIR
Disassemble
4. Slacken nuts and bolts clamping ball joints and
adjuster.
5. Remove ball joints, adjuster and clamps.
Assemble
6. Position ball joints, adjuster and clamps on track
rod.
7. Screw adjuster and ball joints in to full extent of
threads.
8. Using adjuster, set track rod to nominal length of
1340 mm
±
10mm.
9. Secure clamps with nuts and bolts.
Refit
10. Position track rod on steering knuckles. Secure
with nuts. Tighten to
50 Nm (37 lbf.ft)
11. Fit front wheels. Tighten to
108 Nm (80 lbf.ft)
12. Remove safety stands. Lower vehicle.
13. Set front wheel alignment.
See Adjustment.