Range Rover P38 Panel Repair Procedures - Page 1291
77
PANEL REPAIRS
NEW RANGE ROVER
6
PROCEDURES
15. Use a resistance spot welder where access
permits. Try to ensure weld quality by using a
weld monitor where possible.
16. MIG tack weld butt joints and re-check alignment
and panel contours where necessary. Ensure
that a gap is maintained to minimise welding
distortion, by inserting a hacksaw blade as an
approximate guide.
17. Dress MIG tack welds using a sander with 36 grit
disc, or a belt-type sander where access is
limited.
18. MIG seam weld butt joints.