B3000 SE Regular Cab 4WD V6-3.0L OHV (1998)
9. Remove the reverse servo.
1) Remove the reverse servo cover and gasket. Discard gasket.
WARNING: The piston assembly can pop out due to spring pressure when removing the cover.
10. Remove the reverse servo piston and rod.
CAUTION: Support main control valve body.
11. Do not remove the two (gold) bolts specified.
12. Remove the 23 main control valve body (black) bolts.
CAUTION: Support the main control valve body.
NOTE: Use a 10 mm socket to remove the 16 M6x40mm, 4 M6x45mm, 2 M6x35 and 1 M6x30mm control valve body screws.
13. Remove the control valve body as an assembly.
14. Install the alignment pins into the transmission case.
