B3000 SE Regular Cab 4WD V6-3.0L OHV (1998)
5. Install the EPC and SS2 solenoids.
CAUTION: The solenoid clamp must be installed in the TCC and EPC solenoid grooves, shift solenoid pockets and the No. 204 plug.
6. Install the solenoid clamp.
1) Position the solenoid clamp on the main control valve body.
2) Install the solenoid clamp bolts.
7. Connect the SS1 and SS3 shift solenoid electrical connectors.
8. Connect the TCC, CCS/SS4, SS2, and EPC solenoid electrical connectors.
CAUTION: Excessive pressure may break the retaining pins.