B3000 SE Regular Cab 4WD V6-3.0L OHV (1998)
1. Install the transmission case (16 pinch) electrical connector.
1) Lubricate the transmission case (16 pinch) electrical connector O-rings with petroleum i'011
CAUTION: Align the slot on the TSS sensor electrical connector with the slot in the 16 pin case connector.
2. Press the transmission case (16 pinch) electrical connector through the case until a click is heard.
3. Install the TSS sensor wire.
1) Install TSS sensor wire into (16 pin) case connector.
2) Install TSS sensor wire into the locator.
CAUTION: Don not overstretch the retaining spring.
4. Install the transmission case (16 pin) electrical connector retaining spring.
