A/c equipped
- Make
- Mazda
- Model
- MX-5 (NA) Factory Workshop Manual
- Year
- 1990–1992
- Section
- B Engine › A/c equipped
or P/S + A/C EQUIPPED
A/C EQUIPPED
Deflection
| Drive belt | New | Used |
|---|---|---|
| Alternator | 8.0—9.0 (0.31—0.35) | 9.0—10.0 (0.35—0.39) |
| P/S, P/S + A/C | 8.0—9.0 (0.31—0.35) | 9.0—10.0 (0.35—0.39) |
| A/C | 8.0—9.0 (0.31—0.35) | 9.0—10.0 (0.35—0.39) |
Note
- Belt tension can be measured between any pulleys.
Tension
| Drive belt | New | Used |
|---|---|---|
| Alternator | 491—589 (50—60, 110—132) | 422—491 (43—50, 95—110) |
| P/S, P/S + A/C | 491—589 (50—60, 110—132) | 422—491 (43—50, 95—110) |
| A/C | 491—589 (50—60, 110—132) | 422—491 (43—50, 95—110) |
Adjustment
Caution
- If a new belt is used, adjust the belt deflection at the midpoint of new belt specification.
(1) Alternator belt
If necessary, loosen the alternator bolts Ⓐ and Ⓑ and adjust the belt deflection by turning the adjusting bolt Ⓒ .
Tightening torque
Ⓐ : 19—25 N·m (1.9—2.6 m·kg, 14—19 ft-lb)
Ⓑ : 37—52 N·m (3.8—5.3 m·kg, 27—38 ft-lb)
(2) P/S belt, P/S + A/C belt
If necessary, loosen the P/S oil pump bolt Ⓐ and nuts Ⓑ and Ⓒ and adjust the belt deflection by turning the adjusting bolt Ⓓ .
Tightening torque
Ⓐ : 31—46 N·m (3.2—4.7 m·kg, 23—34 ft-lb)
Ⓑ : 36—54 N·m (3.7—5.5 m·kg, 27—40 ft-lb)
Ⓒ : 19—25 N·m (1.9—2.6 m·kg, 14—19 ft-lb)
Parts & tools for this job For 1990 Mazda MX-5
- PARTEngine gasket setSearch: Mazda MX-5 1990 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.