Idle Speed
- Make
- Mazda
- Model
- MX-5 (NA) Factory Workshop Manual
- Year
- 1990–1992
- Section
- B Engine › Idle Speed
EngineIdle Speed
Tightening torque:
19—25 N·m (1.9—2.6 m-kg, 14—19 ft-lb)
Idle Speed
Inspection / Adjustment
1. Connect the SST or jumper wire to the diagnosis connector. (Refer to page B–8.)
Idle speed: 850 ± 50 rpm (Neutral)
3. If the idle speed is not within specification, remove the blind cap from the air adjusting screw and adjust it. 4. After adjusting the idle speed, install the blind cap and disconnect the SST or jumper wire from the diagnosis connector.
Parts & tools for this job For 1990 Mazda MX-5
- PARTEngine gasket setSearch: Mazda MX-5 1990 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.