Workshop Manuals Factory service & repair Mazda
01 General information02 Engine03 Engine performance04 Transmission05 Driveline and axles06 Suspension07 Brakes08 Steering09 Restraints10 Heating and air conditioning11 Electrical12 Accessories and equipment13 Body and cab accessories
Mazda MX-5 (NC) Factory Workshop Manual (2006-2008)07 · Brakes
07 · Brakes

Clearance inspection

Make
Mazda
Model
MX-5 (NC) Factory Workshop Manual
Year
2006–2008
Section
Antilock Brake System (2008) › Clearance inspection
BrakesClearance inspection · page 1 of 2

CLEARANCE INSPECTION

  1. Verify the clearance between the ABS sensor rotor and the ABS wheel-speed sensor.
    • If there is any malfunction, check for improper installation, and replace if necessary.

Clearance

0.8-1.6 mm {0.032-0.062 in}

BRAKES – Antilock Brake System (2008) – figure
Fig. 15: Inspecting ABS Sensor-To-Rotor Clearance
Courtesy of MAZDA MOTORS CORP.

SENSOR OUTPUT VALUE INSPECTION

  1. Turn the ignition switch off.
  2. Connect the M-MDS or equivalent to the DLC-2.

Parts & tools for this job For 2006 Mazda MX-5

As an Amazon Associate we earn from qualifying purchases.