Workshop Manuals Factory service & repair Mazda
01 General information02 Engine03 Engine performance04 Transmission05 Driveline and axles06 Suspension07 Brakes08 Steering09 Restraints10 Heating and air conditioning11 Electrical12 Accessories and equipment13 Body and cab accessories
Mazda MX-5 (NC) Factory Workshop Manual (2006-2008)07 · Brakes
07 · Brakes

Clearance inspection (page 2 of 2)

Make
Mazda
Model
MX-5 (NC) Factory Workshop Manual
Year
2006–2008
Section
Antilock Brake System (2008)
BrakesClearance inspection · page 2 of 2
BRAKES – Antilock Brake System (2008) – figure
Fig. 16: Locating DLC-2 Connector
Courtesy of MAZDA MOTORS CORP.
  1. Select the following PIDs using the M-MDS or equivalent:
    • LR_WSPD

(LR wheel-speed sensor)

  • RR_WSPD

(RR wheel-speed sensor)

  1. Start the engine and drive the vehicle.
  2. Verify that the display of the M-MDS or equivalent shows the same value as the speedometer.
    • If there is any malfunction, replace the rear ABS wheel-speed sensor.

Parts & tools for this job For 2006 Mazda MX-5

As an Amazon Associate we earn from qualifying purchases.