Workshop Manuals Factory service & repair MG
01 Introduction02 General information03 Information04 Maintenance05 Engine06 Engine management system - MEMS07 Cooling system08 Manifold & exhaust systems09 Clutch10 Manual gearbox11 Automatic gearbox - EM-CVT12 Drive shafts13 Steering14 Suspension15 Brakes16 Restraint systems17 Body18 Heating & ventilation19 Air conditioning20 Wipers & washers21 Electrical22 Instruments
MG MGF Factory Workshop Manual (1995-2000)17 · Body
17 · Body & interior

Hard top

Make
MG
Model
MGF Factory Workshop Manual
Year
1995–2000
Section
Hood › Hard top
BodyHard top

HARD TOP

Service repair no - 76.61.01

Remove

Hard top – Service repair no - 76.61.01
  1. Disconnect multiplug from heated rear window.
  2. Release 2 catches securing hard top to header rail.
  3. Release 2 catches securing hard top to hood mounting brackets.
  4. With assistance, remove hard top from vehicle.

Refit

NOTE: Ensure side catches are in the raised position before fitting the hard top to the vehicle.

  1. With assistance, position hard top to vehicle.
  2. Secure hard top to header rail with catches.
  3. If necessary, release clips and adjust catches.
  4. Secure hard top to hood mounting brackets.
  5. Adjust catches if required.
  6. Connect screen heater multiplug.

Parts & tools for this job For 1995 MG MGF

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.