Workshop Manuals Factory service & repair MG
MG TF Factory Workshop Manual (2002-2005)03 · General data, torque settings and capacities
03 · General

Engine - K Series

Make
MG
Model
TF Factory Workshop Manual
Year
2002–2005
Section
General data › Engine - K Series
General data, torque settings and capacitiesEngine - K Series

ENGINE - K SERIES

1.6 MPi

Type16 valve DOHC
Cylinder arrangement4 in line - transverse, No.1 cylinder at front of engine
Bore - liner80.00 mm
Stroke79.00 mm
Capacity1589 cm3
Firing order1 - 3 - 4 - 2
RotationClockwise, viewed from the front of the engine
Compression ratio10.5 : 1
Idle speed
  1.6 MPi MEMS 3825 ± 50 rpm
Maximum power85 kW (114 bhp) @ 6,250 rev/min.
Maximum torque145 Nm @ 4,700 rev/min.
Maximum engine speed6,800 rev/min.

1.8 MPi

Type16 valve DOHC
Cylinder arrangement4 in line - transverse, No.1 cylinder at front of engine
Bore - liner80.00 mm
Stroke89.30 mm
Capacity1796 cm3
Firing order1 - 3 - 4 - 2
RotationClockwise, viewed from the front of the engine
Compression ratio10.5 : 1
Idle speed
  1.8 MPi MEMS 3 (Manual and Stepspeed)825 ± 50 rpm
Maximum power:
  Manual Transmission100 kW (134 bhp) @ 6,750 rev/min.
  Stepspeed (Em-CVT)88 kW (118 bhp) @ 5,500 rev/min.
Maximum torque:
  Manual Transmission165 Nm @ 5,000 rev/min.
  Stepspeed (Em-CVT)165 Nm @ 3,000 rev/min.
Maximum engine speed:
  Manual transmission6,800 rev/min.
  Stepspeed (Em-CVT)6,000 rev/min.

1.8 VVC

Type16 valve DOHC with Variable Valve Control on inlet valves
Cylinder arrangement4 in line - transverse, No.1 cylinder at front of engine
Bore - liner80.00 mm
Stroke89.30 mm
Capacity1796 cm3
Firing order1 - 3 - 4 - 2
RotationClockwise, viewed from the front of the engine
Compression ratio10.6 : 1
Idle speed
  1.8 VVC MEMS3925 ± 50 rpm
Maximum power118 kW (158 bhp) @ 6,900 rev/min.
Maximum torque174 Nm @ 4,700 rev/min.
Maximum engine speed7,100 rev/min.

Parts & tools for this job For 2002 MG TF

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.