Workshop Manuals Factory service & repair MG
01 Introduction02 General information03 General data, torque settings and capacities04 Maintenance05 Engine (K Series)06 Engine management (MEMS 3), fuel and emission systems07 Cooling system08 Manifolds and exhaust system09 Clutch10 Manual gearbox11 Automatic gearbox (Stepspeed Em-CVT)12 Drive shafts13 Steering14 Front suspension15 Rear suspension16 Brakes17 Restraint systems (SRS)18 Body19 Heating and ventilation20 Air conditioning21 Wipers and washers22 Electrical23 Instruments
MG TF Factory Workshop Manual (2002-2005)03 · General data, torque settings and capacities
03 · General

Wheels

Make
MG
Model
TF Factory Workshop Manual
Year
2002–2005
Section
General data › Wheels
General data, torque settings and capacitiesWheels

WHEELS

Front6.0J x 15 alloy 7.0J x 16 alloy
Rear6.0J x 15 alloy 7.0J x 16 alloy
Spare*5.5J x 14 steel 7.0J x 16 alloy
Road wheel nut torque70 Nm

TYRE SIZES

Front185/55 R15 82V 195/45 R16 84V
Rear205/50 R15 86V 215/40 ZR16 82W

Spare*

5.5J x 14 steel175/65 R14 82T
7.0J x 16 alloy195/45 R16 84V

NOTE: * Some vehicles are not fitted with a spare wheel, but come equipped with an Instant Mobility System (IMS) instead. Refer to the Owner’s Handbook for details of how to use the IMS.

CAUTION: The space-saver spare wheel is for temporary use only. Maximum road speed should be limited to 50 mph (80 km/h) when a space-saver tyre is in use. No more than one temporary space-saver spare wheel may be fitted at any one time.

CAUTION: Refer to the Owner’s Manual for all Cautions and Warnings related to the IMS. Always keep to the recommended speed and adhere to the precautions stipulated when a defective tyre has been inflated using the IMS.

Parts & tools for this job For 2002 MG TF

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.