Workshop Manuals Factory service & repair MG
01 Introduction02 General information03 General data, torque settings and capacities04 Maintenance05 Engine (K Series)06 Engine management (MEMS 3), fuel and emission systems07 Cooling system08 Manifolds and exhaust system09 Clutch10 Manual gearbox11 Automatic gearbox (Stepspeed Em-CVT)12 Drive shafts13 Steering14 Front suspension15 Rear suspension16 Brakes17 Restraint systems (SRS)18 Body19 Heating and ventilation20 Air conditioning21 Wipers and washers22 Electrical23 Instruments
MG TF Factory Workshop Manual (2002-2005)03 · General data, torque settings and capacities
03 · General

Front suspension

Make
MG
Model
TF Factory Workshop Manual
Year
2002–2005
Section
General data › Front suspension
General data, torque settings and capacitiesFront suspension

FRONT SUSPENSION

TypeCoil spring over gas filled damper, located by double wishbones and with anti-roll bar.

Trim height*

Standard suspension358 mm
Sports suspension348 mm
Front damper colour codesBlue

Front coil spring data:

Total coils7.7
Active coils6.45
Wire diameter12 mm
Free length241.9 mm
Anti-roll bar diameter20 mm

* = Height to wheel arch from hub centre at unladen weight

± 10 mm ± 10 mm

REAR SUSPENSION

Type4-link with coil spring over gas-filled damper and with anti-roll bar.

Trim height*

Standard suspension353 mm
Sports suspension343 mm
Rear damper colour codesRed

Front coil spring data:

Total coils7.7
Active coils6.45
Wire diameter14 mm
Free length228.3 mm
Anti-roll bar diameter18 mm

* = Height to wheel arch from hub centre at unladen weight

± 10 mm ± 10 mm

Parts & tools for this job For 2002 MG TF

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.