WIPER AND WASHER - Nissan 200SX S12 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 200SX Nissan 200SX S12 1986 Workshop Manual
- Section
- General › WIPER AND WASHER - Nissan 200SX S12 Workshop Manual
WIPER AND WASHER
WIPER AND WASHER
Windshield Wiper Removal and Installation
REMOVAL INSTALLATION ¢ When removing wiper arm, lift up wiper arm, Wiper arms of different length are used for the pull out arm retainer, and hold arm steady, driver's side and passenger side. They have an identifying mark and care must be taken to install ‘them properly. Arm retsines Identifying mark. “D" (short arm} ........ Oriver's side “A” (long arm)... 2.6.45 Passenger side Adjustment
1. Prior to wiper arm installation, set wiper switch to "LOW" to operate wiper motor and then turn it "OFF" (Auto Stop). 2, Adjust wiper blades within clearance “C", and tighten wiper arm attaching nut to the speci- fied torque.
3. Eject washer flui Set wiper switch to “LOW” to operate wiper motor and then turn it "OFF",
4. Ensure that wiper blades stop within clearance
Claorance "C 6-20 (0.20-0.79)
Unt: mm tnt Ty Wim thom, teh SELz6ee
Parts & tools for this job For Nissan 200SX
As an Amazon Associate we earn from qualifying purchases.