Workshop Manuals Factory service & repair Rover
01 Introduction02 General information03 Information04 Maintenance05 Engine - K806 Engine - K1607 Engine - K16 with VVC08 Engine - L Series09 Emission control10 Engine management system - MEMS11 Engine management system - EDC12 Fuel delivery system13 Cooling system - K Series14 Cooling system - L Series15 Manifold & exhaust systems16 Clutch17 Manual gearbox - R6518 Manual gearbox - PG119 Automatic gearbox - CVT20 Automatic gearbox21 Drive shafts22 Steering23 Front suspension24 Rear suspension25 Brakes26 Restraint systems27 Body28 Heating & ventilation29 Air conditioning30 Wipers & washers31 Electrical32 Instruments
Rover 200 Workshop Manual (1995-1999)27 · Body
27 · Body & interior

Sun roof

Make
Rover
Model
200 Workshop Manual
Year
1995–1999
Section
Sunroof › Sun roof
BodySun roof

SUN ROOF

Service repair no - 76.82.44

Remove

  1. Remove headlining. See Interior trim components.
Sun roof – Remove headlining. See Interior trim components.
  1. Release 4 clips and disconnect drain tubes.
  2. Disconnect multiplug from sun roof control unit.
  3. Release interior lamp harness from sun roof tray.
  4. Remove 11 bolts securing sun roof assembly to roof and remove sun roof.

NOTE: Assistance may be required to remove sun roof assembly.

Refit

  1. Fit sun roof assembly and tighten bolts to 9 Nm.
  2. Secure interior lamp harness to sun roof tray.
  3. Connect multiplug to sun roof control unit.
  4. Connect drain tubes to sun roof and secure with clips.
  5. Fit headlining. See Interior trim components.

Parts & tools for this job For 1995 Rover 200

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.