Sun roof motor
- Make
- Rover
- Model
- 200 Workshop Manual
- Year
- 1995–1999
- Section
- Sunroof › Sun roof motor
BodySun roof motor · page 1 of 2
SUN ROOF MOTOR
Service repair no - 76.82.53
Remove
- Remove headlining. See Interior trim components.
- Remove 2 Lucars from sun roof motor.
- Remove multiplug from sun roof motor.
- Remove 3 screws securing motor to sun roof tray.
- Remove motor.
Refit
- Position motor to sun roof tray and tighten bolts to 9 Nm.
- Fit multiplug and Lucars to motor.
- Fit headlining. See Interior trim components.
SUN ROOF DRAIN TUBE
Service repair no - 76.82.21
Remove
- Remove headlining. See Interior trim components.
- Release clip securing drain tube to sun roof tray.
- Release drain tube from sun roof tray.
- Raise vehicle.
WARNING: Support on safety stands.
- Remove road wheel(s).
- Remove wheel arch liner. See Exterior fittings.
- Release drain tube grommet from body.
- Withdraw drain tube down through wheel arch.
Parts & tools for this job For 1995 Rover 200
- TOOLTrim removal tool kitSearch: trim removal tool kit
- PARTTouch-up paintSearch: Rover touch up paint
- PARTPanel clip assortmentSearch: Rover panel clips assortment
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.