Brake light switch - models with bosch ECM (Brakes) (page 2 of 2)

10. Screw switch in until a closed circuit condition exists with the pedal released and an open circuit condition exists with the pedal depressed.
11. Screw switch in one further turn.
12. Tighten brake light switch locknut.
13. Recheck switch operation. Ohmmeter should read open circuit with brake pedal depressed, closed circuit with brake pedal released.

CAUTION: Ensure the switch does not prevent the brake pedal returning fully.

14. Connect multiplug to brake light switch.
15. Fit fuse box to mounting bracket, fit nuts and tighten to 10 Nm.
16. Position closing panel to underside of fascia and secure with turnbuckles.
17. Fit fuse box cover and secure with turnbuckles.