Automatic gearbox - CVT
- Make
- Rover
- Model
- 200 Workshop Manual
- Year
- 1995–1999
- Section
- Torque wrench settings › Automatic gearbox - CVT
InformationAutomatic gearbox - CVT
AUTOMATIC GEARBOX - CVT
| Inhibitor/reverse light switch | 12 Nm |
| Drain plug | 1 30 Nm |
| Fluid pan bolts | 10 Nm |
| Pitot chamber bolts | 12 Nm |
| Pitot tube | 10 Nm |
| Fluid cooler union nut | 15 Nm |
| Gearbox fluid hose adaptors | 37 Nm |
| Dipstick tube retaining bolt | 25 Nm |
| Primary cover olts | 10 Nm |
| Secondary cover bolts | 10 Nm |
| Selector shaft nut | 15 Nm |
| Flywheel cover plate bolts1 | 8 Nm |
| Engine to gearbox bolts | 85 Nm |
| Mounting bracket to gearbox | 80 Nm |
| Gearbox mounting bracket to engine bolts | 45 Nm |
| Steady bar to engine through bolt | 45 Nm |
| Steady bar to body through bolt | 80 Nm |
| Gear selector lever nut | 7 Nm |
| Gearchange linkage to rear beam bolts | 24 Nm |
1Tighten in sequence
DRIVE SHAFTS
| Drive shaft NEW nut | 180 Nm |
Parts & tools for this job For 1995 Rover 200
- PARTTransmission filter kitSearch: Rover 200 1995 transmission filter kit
- FLUIDAutomatic transmission fluidSearch: Rover automatic transmission fluid
- TOOLFluid transfer pumpSearch: fluid transfer pump
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.