Emission control
- Make
- Rover
- Model
- 200 Workshop Manual
- Year
- 1995–1999
- Section
- Torque wrench settings › Emission control
InformationEmission control
EMISSION CONTROL
| Catalytic converter heat shield bolts | 8 Nm |
ENGINE MANAGEMENT SYSTEM - MEMS
| Air cleaner to battery tray bolts | 9 Nm |
| Intake resonator to battery tray bolts | 9 Nm |
| Expansion tank to body bolts | 9 Nm |
| Throttle body to inlet manifold bolts | 7 Nm |
| Spark plugs to cylinder head | 27 Nm |
| H.t. lead cover bolts | 2 Nm |
| Rotor arm to camshaft, NEW patchlock screw | 8 Nm |
| Ignition coil to engine: | |
| M10 bolts | 45 Nm |
| M6 bolts | 9 Nm |
| ECM to bracket nuts | 4 Nm |
| Idle air control valve to manifold Torx screws | 8 Nm |
| Intake air temperature sensor to manifold | 7 Nm |
| Engine coolant temperature sensor to housing | 15 Nm |
| Crankshaft position sensor to housing bolt | 6 Nm |
| Throttle position sensor to housing Torx screws | 1.5 Nm |
| Oxygen sensor to exhaust manifold | 55 Nm |
| Fuel rail to manifold bolts | 10 Nm |
| Fuel feed pipe to fuel rail bolts | 5 Nm |
| Variable Valve Control (VVC): | |
| Hydraulic control unit solenoid nut | 12 Nm |
| Oil temperature sensor | 15 Nm |
| Manifold absolute pressure sensor bolts | 10 Nm |
| Camshaft position sensor bolt | 6 Nm |
Parts & tools for this job For 1995 Rover 200
- PARTExhaust gasketSearch: Rover 200 1995 exhaust gasket
- TOOLPenetrating oilSearch: penetrating oil
- TOOLOBD2 scannerSearch: OBD2 scanner
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.