Suspension
- Make
- Rover
- Model
- 200 Workshop Manual
- Year
- 1995–1999
- Section
- Torque wrench settings › Suspension
InformationSuspension
SUSPENSION
| Road wheel nuts1 | 110 Nm |
Front Suspension
| Anti-roll bar link to lower arm bolt | 60 Nm |
| Anti-roll bar to link bolt | 45 Nm |
| Anti-roll bar clamp to rear beam bolts | 22 Nm |
| Damper shaft nut | 2 40 Nm |
| Damper top mounting nuts2 | 30 Nm |
| Damper to hub pinch bolt2 | 80 Nm |
| Lower arm front pivot bolt | 45 Nm |
| Lower arm ball joint nut | 55 Nm |
| Upper arm ball joint nut | 30 Nm |
| Tie-rod to lower arm bolts | 80 Nm |
| Tie-rod to front beam nut | 45 Nm |
| Front beam to body bolts | 100 Nm |
| Rear beam to body bolts | 100 Nm |
Rear Suspension
| Damper to mounting plate, self locking nut | 30 Nm |
| Damper mounting plate nuts2 | 38 Nm |
| Damper to ’H’ frame bolt | 80 Nm |
| Hub shaft NEW nut | 185 Nm |
| ’H’ frame to body bolts | 100 Nm |
| ’H’ frame pivot bush bolt | 100 Nm |
| Anti-roll bar to ’H’ frame nuts | 80 Nm |
| Stub axle to ’H’ frame bolts | 45 Nm |
1Tighten in diagonal sequence
2Tighten with weight of vehicle on suspension.
Parts & tools for this job For 1995 Rover 200
- TOOLCoil spring compressorSearch: coil spring compressor
- TOOLBall joint separatorSearch: ball joint separator
- PARTShock absorbersSearch: Rover 200 1995 shock absorbers
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.