Manifold and exhaust
- Make
- Rover
- Model
- 200 Workshop Manual
- Year
- 1995–1999
- Section
- Torque wrench settings › Manifold and exhaust
InformationManifold and exhaust
MANIFOLD AND EXHAUST
| Exhaust front pipe to catalyst nuts | 50 Nm |
| Catalyst to intermediate pipe nuts | 50 Nm |
| Intermediate pipe to tail pipe nuts | 50 Nm |
’K’ Series
’K8’ - Inlet manifold to cylinder head1
| nut and bolts | 25 Nm |
| ’K8’ - Inlet manifold chamber to manifold bolts | 25 Nm |
| ’K16’ Non VVC - Inlet manifold to cylinder head1 | |
| nut and bolts | 17 Nm |
| ’K16 VVC’ - Inlet manifold to cylinder head1 | |
| nut and bolts | 25 Nm |
| Inlet manifold to support bracket bolt | 1 25 Nm |
| Exhaust manifold to cylinder head nuts | 45 Nm |
| Alternator heat shield, bolts | 10 Nm |
| Support bracket to exhaust manifold nuts | 25 Nm |
| Exhaust front pipe to manifold nuts | 50 Nm |
’L’ Series1
| Inlet manifold to cylinder head bolts | 25 Nm |
| Exhaust manifold to cylinder head:1 | |
| Nuts1 | 25 Nm |
| Bolts | 33 Nm |
| Exhaust manifold support bracket bolt | 25 Nm |
| Turbocharger to exhaust manifold nuts | 25 Nm |
| Turbocharger pipe to cylinder head bolts | 10 Nm |
CLUTCH
’K’ Series1 Pressure plate to flywheel Torx bolts:
| 1.1, 1.4 and 1.6 | 18 Nm |
| 1.8 | 26 Nm |
’L’ Series1
| Pressure plate to flywheel Torx bolts | 26 Nm |
| Clutch release fork to shaft | 29 Nm |
1Tighten in diagonal sequence
Parts & tools for this job For 1995 Rover 200
- PARTExhaust gasketSearch: Rover 200 1995 exhaust gasket
- TOOLPenetrating oilSearch: penetrating oil
- TOOLOBD2 scannerSearch: OBD2 scanner
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.