Rover
200 Workshop Manual (1995-1999)
Information
Torque wrench settings
Screens
03 · General
Screens
Make
Rover
Model
200 Workshop Manual
Year
1995–1999
Section
Torque wrench settings › Screens
Information Screens
Screens
Sun roof mountings screws 5 Nm Sun roof to body bolts 9 Nm Rear quarter glass nuts - 3 door 9 Nm
HEATING AND VENTILATION
Heater unit to bulkhead:
6 mm nuts/bolts 10 Nm 8 mm nuts/bolts 22 Nm Blower motor screws 9 Nm
AIR CONDITIONING
Pipe bracket to condenser bolts 6 Nm Condenser to fan housing bolts 9 Nm Trinary switch 12 Nm Receiver/drier to body bolts 9 Nm Pipes to receiver/drier bolts 5 Nm Pipe to pipe unions 25 Nm Pipe bracket to gearbox bracket bolt 9 Nm Relay module to body bolts 9 Nm Expansion valve 9 Nm Adaptor to expansion valve 9 Nm Evaporator casing screws 10 Nm Pipe flange to evaporator bolt 10 Nm Pipe bracket screw (LH Drive) 10 Nm
’K’ Series
Compressor to mounting bracket bolts 45 Nm Pipe union to compressor 35 Nm Evaporator pipe to compressor 45 Nm Condenser pipe to compressor 25 Nm
’L’ Series
Compressor mounting bolts 45 Nm Pipe unions to compressor 45 Nm Engine overheat sensor 15 Nm
03 General
Parts & tools for this job For 1995 Rover 200 Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.
