Workshop Manuals Factory service & repair Rover
Rover 200 Workshop Manual (1995-1999)26 · Restraint systems
26 · Body & interior

Front seat belt and pre-tensioner - 3 door

Make
Rover
Model
200 Workshop Manual
Year
1995–1999
Section
Repairs › Front seat belt and pre-tensioner - 3 door
Restraint systemsFront seat belt and pre-tensioner - 3 door · page 1 of 2

FRONT SEAT BELT AND PRE-TENSIONER - 3 DOOR

Service repair no - 76.73.13

CAUTION: See safety precautions in SRS section before starting work.

Remove

  1. Disconnect battery earth lead.
  2. Remove rear quarter lower trim casing. See BODY, Interior trim components.
Front seat belt and pre-tensioner - 3 door – Remove rear quarter lower trim casing. See BODY, Interior trim components.
  1. Remove seat belt upper bolt cover and remove bolt.
  2. Release seat belt guide from ’B’ post.
Front seat belt and pre-tensioner - 3 door – Release seat belt guide from ’B’ post.
  1. Remove Torx bolt securing lower seat belt guide.
  2. Remove belt from guide.
Front seat belt and pre-tensioner - 3 door – Remove belt from guide.
  1. Remove bolt securing seat belt reel to ’B’ post and remove reel.
  2. Remove front seat. See BODY, Seats and seat belts.

Parts & tools for this job For 1995 Rover 200

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.