Workshop Manuals Factory service & repair Rover
01 Information02 General data03 Engine04 Engine management system – PGM-Fi05 Cooling system, manifold and exhaust06 Clutch07 Manual gearbox08 Automatic gearbox09 Drive shafts10 Differential – manual gearbox11 Differential – automatic gearbox12 Steering13 Suspension14 Brakes and ABS15 Brakes – ABS BY416 Body17 Heating and ventilation18 Electrical19 Supplementary restraint system (SRS)
Rover Rover 600 Repair Manual - Volumes 1 and 2 - 2nd Edition12 · Steering
12 · Steering & suspension

Steering Wheel Rotation Play (page 2 of 2)

Make
Rover
Model
600 Rover 600 Repair Manual - Volumes 1 and 2 - 2nd Edition
Section
Fault finding
SteeringSteering Wheel Rotation Play · page 2 of 2
Diagram showing the power steering speed sensor (A) and plug (B) located near the steering column.

57M0068

  1. Power Steering Speed Sensor
  2. Plug
  1. Stop the engine. Disconnect the hose from the power steering speed sensor and plug the hose and the sensor fitting as shown.
  2. Start the engine and let it idle.
  • If the reading is now 32 N or less, replace the power steering speed sensor.
  • If the reading is still more than 32 N, check the gearbox and pump.

Parts & tools for this job For Rover 600

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.