Reinstall:

REINSTALL:

• Tighten the injectors (

REINSTALL:

• The dipstick guide tube (
• The exhaust manifold (36) equipped with a new
• The oil filter (

gasket (37).

• The vacuum pump, equipped with a new O-ring
• The water inlet manifold (38) and its seal (39).
• Coat area (

41) to 55 Nm. 42) with SCELBLOC sealant, and the dipstick. 43).

(45). Tighten the bolts to 15 Nm. 1) with a fine layer of AUTO SEAL GOLD (class 2) silicone paste.

REINSTALL:

• The water outlet box (
• The thermostat (
• The thermostat housing (
• The fast idle control (
• A new diesel fuel filter (
• Coat gasket face (H) with a fine layer of AUTO SEAL GOLD (class 2) silicone paste.
• Reinstall the intake manifold (40). Tighten the bolts to 20 Nm.

46). 47) and its new seal (48). 49). 50) (if installed). 51).