Gearbox?: removing and fitting

Make

SEAT

Model

Leon Mk1

Section

02R, 5-speed › Gearbox mechanics,operation, construction,diff. › Gearbox?: removing and fitting

Power transmissionGearbox?: removing and fitting

Torque settings

Tightening torques for engine/gearbox connection:

Item	Bolt	Amount	Torque (Nm)
1	M12×55	2	80
2 → Note	M12×55	1	80
3 → Note	M12×150	2	80
4	M10×55	3	45

1)  M8 threaded pin with bolts. -A-: dowel sleeves for centralising

Console attachment Always replace the bolts	40 Nm + 90°
Gearbox socket to console attachment Always replace the bolts	40 Nm + 90°
Pendulum support to subframe Always replace the bolt	40 Nm
Pendulum support to the gearbox Always replace the bolts	30 Nm
Link bar on the stabilizer bar Always replace the bolt	40 Nm
Articulated semi-axle to the articulation flange on the gearbox (diagonally in two stages) Always replace the bolts	I - 10 Nm II - 70 Nm
Thermal protection cover of the right hand side constant velocity joint	35 Nm
Wheel bolts	120 Nm
Gearbox slave cylinder	20 Nm
Bracket for clutch slave cylinder lines	20 Nm
Bracket for selection and engagement cables	25 Nm
Selection rod counter weight Always replace the nut	20 Nm
Air filter:	8 Nm

01 Transmission