Leon Mk1
| Gearbox casing cover: Assembly overview |
| 1 - | Cylindrical roller bearing |
| q | From the secondary shaft. |
| q | Do not confuse with the roller bearing socket for the input shaft |
| q | Can be replaced separately. |
| q | Remove → Chapter |
| q | With gearboxes manufactured from week 34/2006 with larger diameter → Fig. |
| q | Press in for gearboxes manufactured up to week 34/2006 → Fig. |
| q | Press in for gearboxes manufactured from week 34/2006 → Fig. |
| q | Securing → Fig. |
| 2 - | Cylindrical roller bearing |
| q | For input shaft |
| q | Do not confuse with the roller bearing socket for the secondary shaft |
| q | Can be replaced separately. |
| q | Remove → Chapter |
| q | With gearboxes manufactured from week 34/2006 with larger diameter → Fig. |
| q | Press in for gearboxes manufactured up to week 34/2006 → Fig. |
| q | Press in for gearboxes manufactured from week 34/2006 → Fig. |
| q | Securing → Fig. |
| 3 - | Gearbox housing cover |
| q | The conical roller bearing has been modified with gearboxes manufactured from week 34/2006 → Fig. |
| 4 - | Electromagnet |
| q | Can only be inserted in the cover with groove -arrow- |
| 5 - | Clip |
| q | Holds the solenoid in position |
